SRJ Header
Home | Editorial | Rates | Production | Circulation | Who's Who | ACD | Back Issues | Contact

Production Information

Digitally supplied specification

Advertisements should be supplied as high resolution EPS (with fonts embedded), TIF, JPG or PDF files to pre-press standards of a minimum 300 pixels/inch (118 pixels/cm). We also require a high resolution proof. PLEASE NOTE: without a high quality proof, SRJ cannot be held responsible for the output of supplied files. Please also be aware that the output from files supplied in 'composition' software such as QuarkXPress or Illustrator cannot be guaranteed by us as computer systems can interpret digital data in differing ways. Hence, we prefer high resolution TIF, JPG or PDF files.

Film

Please note that we no longer accept film for advertisements. Should film be supplied, we will make a charge for conversion to digital format.

Dimensions
Trim Page Size 297mm x 210mm (European A4)
Front Cover Full

303mm deep x 213mm wide
(inc. 3mm bleed top, bottom and 1 side)

Full page (bleed) 303mm deep x 213mm wide
(inc. 3mm bleed top, bottom and 1 side)

Full page (type area)

277mm deep x 190mm wide
Half page (horizontal)
Half page (vertical)
127mm deep x 190mm wide
261mm deep x 92mm wide
Quarter page (horizontal)
Quarter page (vertical)
62mm deep x 190mm wide
127mm deep x 92mm wide
Single column (third page) 261mm deep x 60mm wide

Design and artwork

We can offer a complete design and artwork service for advertisements should you require it. Please contact the editorial office for further details and a quotation.

Please note

If the correct material is not supplied, any work undertaken by us to produce the files required will be chargeable. Corrections to existing film and digital files will also be chargeable.

Top>>>

Ship Repair Journal, A&A Thorpe, 131a Furtherwick Road, Canvey Island, Essex SS8 7AT, United Kingdom.
Telephone: +44 (0)1268 511300, Fax: +44 (0)1268 510467
Email: shipaat@aol.com